GAC®500 XT Product Support
Below are the support materials available for the GAC®500 XT.
A: One time is generally all that is required.
A: No, a measured amount is not required.
A: No. The tester needs to be plugged in when it is in use.
A: Yes, if you move the tester without the shipping screws, you risk damaging the test cell.
A: Yes, the tester will need a power source from a 12v cigarette adapter or plugged into an 110v wall plug. Both are included with the tester.
A: The GAC500XT will hold 16 different grain calibrations.
A: It takes approx. 25 seconds.
A: Yes. The tester will run a self diagnosis when it is turned on, and if the screws are in you could damage the tester.
A: Yes, it will operate.
A: You can call the dealer you bought the tester from, or call DICKEY-john @ 1(800)637-3302 to acquire different calibrations.
- Error Codes
- GAC®500 XT literature
- GAC®500 XT operator's manual
- GAC®500 XT/2000/2100 calibration constants
- Grain Calibrations
You must have Adobe Reader in order to access PDF files. Download Adobe Reader.